For Solar Array Owners & O&M

Solar Array Thermal Screening

You have four thousand modules. This tells you which twenty are running hot and exactly which table, row and position each one sits in — so your technician walks to those twenty instead of the whole site.

What you receive

The array map

Your array, laid out and numbered.

  • A flat, to-scale visible image of the whole installation
  • Your own table, row and string numbering used, not an invented one
  • Agreed before the flight, so every reference means something to your team
  • The matching thermal image over the same layout

The anomaly register

This is the product. Everything else is navigation to it.

  • Each anomaly numbered and located to the individual module
  • How much hotter it is running than the rest of the array
  • The thermal pattern as observed, described plainly
  • A thermal and a visible close-up of that module, side by side

The conditions log

What makes one screening comparable to the next.

  • Date, time, sky condition, wind and ambient temperature
  • How strongly the array was generating
  • Soiling noted as found
  • Camera settings recorded rather than left on default

The array is flown low enough that the individual cells within each module are resolved, not merely the module as a whole. That is what makes a small anomaly visible at all, and it is the reason this is flown rather than walked.

What shows up

A single module hotter than its neighbours

The most common thing worth walking to.

Part of a module warm, the rest of it not

A section behaving differently from the module around it.

A whole module out of step with its string

Reading warmer or cooler than everything either side of it.

An entire string uniformly different

The pattern that points at something upstream of the modules.

Localised heat at one end of a module

Concentrated at the connection end rather than across the cells.

Patterned heat across the cells

A shape within the module rather than an even glow.

Heat differences from soiling or new shading

Recorded as seen, including anything that has grown or been built since.

We locate the anomalies and describe what they look like. We don’t name the fault — that is your technician’s or your thermographer’s call, and the register is written to be handed straight to him. A screening narrows four thousand modules to a short list worth climbing to; it does not replace the inspection at the module itself.

Your monitoring tells you output is down. It doesn’t tell you where.

That is the whole difficulty. Generation is measurably below what it should be, and the array gives no indication which of several thousand modules is responsible. A string is only as good as its weakest module, and finding that module from the ground means walking rows with a handheld instrument.

Meanwhile the loss is continuous. It is not a fault that announces itself — it is a percentage off every sunny day, paid for quietly, usually for a long time before anyone goes looking.

Nothing is switched off and nobody walks between live strings. The array keeps generating throughout, and a screening of a commercial rooftop installation is a short visit rather than a day’s work.

Two ways to buy it

The screening report — for a site owner or facilities manager without a thermographer on the payroll. You receive the register, the maps and the conditions log, and you send your maintenance technician to the modules on the list.

The capture package — for an O&M provider, an installer or a consultancy that already employs a qualified thermographer. We fly it and hand over the georeferenced thermal data with the matching thermal and visible maps. Your thermographer does the analysis and signs it. It is deliberately the cheaper route for anyone already carrying that expertise, and we would rather supply that capability than compete with it.

When it can be flown, and when it cannot

This is the one aerial thermal job that cannot be done at night or in soft light. The array has to be generating strongly for a struggling module to separate itself from a healthy one — under weak sun the two look much the same, and a screening flown in the wrong conditions is worse than none at all, because it reads as a clean bill of health.

So it needs clear sky around the middle of the day, low wind, and an array that is not heavily soiled. October to March is the strong window in this part of the country; clear winter days work too, with a shorter window in the middle of them. The date is agreed against the forecast rather than fixed in advance and flown regardless.

Where we fly

Across the belt surrounding Johannesburg and Pretoria — Gauteng, North West, Free State and Mpumalanga. The towns are listed on theservice area page. If the array sits on an industrial roof, the roof itself is usually worth looking at in the same visit — seeroof condition inspection.

Flown legally

All flight operations comply with SACAA Part 101, including licensed pilot operation and appropriate airspace clearance for every site.

Site selection is part of the quote, not an afterthought. The regulations set minimum distances from people, from buildings belonging to somebody else, and from public roads, and we check a site against those before quoting rather than discovering the problem on the morning of the flight.

Worth knowing what the array is actually doing? Send the site address and the approximate size, and we will tell you plainly whether it is a sensible one to fly and when the conditions would suit.

Ask about your array